Victron Smart Battery Sense

  (1 Review)
Price:  £35.99   (£29.99 Exc. VAT)

Product code:  P02158

Availability:  

  

In stock

The Victron Smart Battery Sense provides accurate battery temperature and voltage data to your Victron MPPT charge controller. As it is mounted directly on the battery and transmits the data by Bluetooth, it eliminates any errors that might result from voltage drop over long cable runs.

The temperature data allows your MPPT controller to adjust the output voltage and so provide optimised charging conditions for your particular battery's requirements. If the battery is too cold it may require an increased charge voltage and vice versa. Your Victron MPPT controller can also use this data to prevent damage to lithium batteries by disabling charging should the battery's temperature become too low. 

Using Bluetooth technology, the Smart Battery Sense can be connected to one or more Victron MPPT solar controllers that also have Bluetooth onboard (e.g the SmartSolar range). The data can then be viewed using the Victron Connect app.

Small and easy to install, the Smart Battery Sense can be attached directly to the battery using the self-adhesive strip on the back of the unit. It is powered by a connection to the battery on which it is mounted and has a very low power consumption.

  • Max voltage: 60V DC
  • Current draw: 1.6mA @12V (when connected/transmitting)
  • Fuse included: 1A
  • Supplied cable length: 40cm of 1mm² red and black
  • Eyelet size for battery connection: M10
  • Operating temp.range: -10 to +60 °C
  • Dimensions: 42 (W) x 40.2 (D) x 14.7 (H) mm 

Part Number:  SBS050150200

Bar Code:  8719076047919

Average Rating (1 Review):  
Write a Review and share your opinions!

Rating:  
Good product
Friday, 27 August 2021  | 

Works well with my Victron smart 75/15 MPPT controller. Easy to install and bluetooth works well. Would recommend

Related Products
Victron SmartShunt 500A
£124.46