The Cerbo-S GX is the latest addition to Victron's GX-range, providing you with fully integrated control and monitoring of all your Victron devices, wherever you are. It is identical to the Cerbo GX but has slightly reduced functionality for less complex installations, so doesn't have resistive tank level inputs, temperature-sense inputs or a BMS-Can port. The Cerbo-S GX might, for example, be a more suitable and cost-effective option for those wanting to use a GX device in a fixed installation (as opposed to a vehicle or boat) where water/waste/fuel tanks are not used and temperature sensing isn't required.
The Cerbo-S GX is a multi-functional communications centre that can be accessed via Bluetooth using the VictronConnect app, directly using the GX Touch 50 or 70 colour touchscreens, via LAN, Wi-Fi access point or over the web using the Victron Remote Management (VRM) portal. This latest addition to the GX-range combines all the best of connectivity, redefining smart power solutions in every way.
Monitoring & Control
You can instantly monitor your battery's state of charge, power consumption, power harvest from solar panels, generator, and mains, or check tank levels and temperature measurements. Easily control the shore power input current limit, (auto)start/stop generator(s) or change any setting to optimise the system. Follow up on alerts, perform diagnostic checks and resolve system issues remotely. The Cerbo-S GX turns any power challenge into an effortless experience.
Optional GX Touch 50 & 70
The optional GX Touch 50 & Touch 70 displays connect directly to the Cebro-S GX and gives you an instant overview of your system and the ability to adjust settings. Their super slim 5 or 7-inch waterproof construction, easy surface-mounting design and single cable connection make it a breeze to create a crisp, clean dashboard for all your Victron devices.
Tackles any power challenge
The Cerbo-S GX serves endless purposes, extending perfect control to the most diverse applications. For solutions including generators, such as marine or backup & off-grid, it will auto-start/stop your generator, or delays ignition until the end of ‘quiet’ periods. For energy storage systems it keeps backup batteries at 100%, kicks-in during power-cuts and diverts excess solar power to self-consumption, saving you money. For RV and Emergency vehicles it keeps vital systems function flawlessly.
- Dual Core Processor
- Ethernet port
- Wi-Fi Access Point
- Bluetooth connectivity
- 3 x VE.Direct ports
- 3 x USB ports & 1 x HDMI port and 1 x Micro SD slot
- VE.Bus & VE.Can (non-isolated) ports
- 4 x digital inputs
- 2 x programmable relays
Accessories included with the Cerbo-S GX
- Power cable with in-line fuse and M8 rings to connect to a battery
- Terminal block for digital inputs
- 2 x terminal blocks for relays
- Terminal block for Power In
- 2 x VE.Can terminators