Non-insulated crimp terminal for maxi blade fuses. Can be used in the maxi blade fuse module from the MTA modular fuse and relay system and in splashproof maxi blade fuse holders (as spares or replacements).
Terminals are crimped and/or soldered to the cable and then inserted into the slots in the underside of the module. Features on the terminals ensure error-proof insertion. The grey secondary locking cage on the module should then be pushed into place to prevent accidental terminal removal.
Please note: only 1 terminal per fuse required for the module as it has a common busbar for the input side.
Tools to crimp this size terminal are expensive and not readily available so we recommend using suitable pliers to fold the tabs over the conductor and insulation.
- MTA terminal type: F800
- MTA part number: 1107670
- Material: Tin-plated copper
- Fitment: Maxi blade fuse legs/terminals
- Cable size: 8.0 - 10.0mm²
Part Number: FH530T.20
|Average Rating (1 Review): |
Sunday, 10 April 2022 | Simon
Handy to be able to choose the correct wire terminal when "making up " the fuse terminal.
MTA supply automotive electrical and electronic products to some of the world’s largest OEM vehicle manufacturers. Established in 1954, it has sites in several global locations and its products are used extensively throughout the auto, leisure, agricultural and industrial vehicle sectors.