Description Heat shrink solder butt connectors that provide rapid, simple and reliable cable joints with no tools. These just require a heat source to fit so are ideal to keep to hand in case of an emergency or for those times when you don't want to have to carry crimp tools with you. Simply heat the connector with a heat gun to shrink the sleeving over the cable, allow the adhesive to flow and the solder to melt. This provides a water resistant seal around the cable entry points so is particularly suited for use in situations where the connection is exposed to moisture (e.g. underside of a vehicle, engine bay, etc.). For best results we recommend using a heat gun to fit these connectors but you can also use a cigarette lighter, micro torch or soldering iron fitted a with hot air nozzle. Sold in packs of 10 or 50 Specification - Insulation colour: Red, Blue, Yellow
- Insulation material: Transparent polyolefin
- Solder type: Pre-fluxed
- Cable size: 0.5 - 1.5mm² (Red), 1.5 - 2.5mm² (Bue), 3.0 - 6.0mm² (Yellow)
|
.jpg)
