Special terminal clamp for use with ceramic cube fuses with a single connection point that fits the positive battery post. This fusing arrangement eliminates any unprotected section of the cable coming from the battery, giving you maximum protection for your circuits.

The fuse fits over the threaded stud on the clamp and the cable is then fitted using a ring or copper tube terminal with a hole dia of 12mm and the supplied isolation nut. The isolation nut fits into the 12mm hole of the ring terminal and prevents the terminal making contact with the stud, ensuring all current flows via the fuse (if the terminal was to touch the stud it would by-pass the fuse and render it redundant).

To ensure effective isolation, we recommend only using a single ring terminal per post. 

This clamp fits SAE tapered positive battery posts only.

Note: fuse and ring terminal not included - fuses can be purchased separately here.

Further information

The maximum torque when tightening the isolation nut is 15Nm. Any greater can cause the nut to crack.

Note: Not to be used with Blue Sea Systems MRBF fuses.