High quality, robust, panel mounted fuse holder that accepts 30mm and 32mm glass (cartridge) fuses.  Provides a very low profile mounting solution if you are short on panel space but have sufficient depth behind.  In a 12V DC system the maximum fuse rating that can safely be fitted to this holder is 10A.

The fuse is retained by a 1/4 turn sprung cap on the front of the holder which is released using a small, flat-bladed screwdriver. A 15mm diameter panel hole is required and the holder is secured from behind using the supplied nut. Cable termination to the holder is via solder tags.

This holder is also suitable for use at 250V AC (15A max. rating).

Supplied without fuse

Manufactured by SCI in Taiwan.