Durite's Automatic Multi-Stage 12V 20A charger is an easy-to-use mains battery charger, ideal for those looking for a simple charging solution in their caravan, motorhome, campervan or boat. Suitable for use with lead-acid batteries including sealed, AGM or Gel, this charger can be connected permanently without harming the battery. Featuring microchip controlled three-stage charging, this charger can maintain your battery in a fully charged state & help keep it in optimum condition to maximise your battery life.
The charger comes pre-wired for easy installation & can be wall-mounted with the detachable brackets included.
Recommended for batteries (or banks of batteries) with a capacity in the range of 150 - 300ah
Features
- Microchip-controlled, 3-stage charging
- LEDs to indicate 'Power ON' and charging stage
- Can be left permanently connected without harming battery
- Suitable for use with sealed, AGM & Gel lead-acid batteries
- Comes with pre-installed cable & crocodile clips
- Reverse connection & short circuit protection
- ON/OFF switch
- Detachable wall-mount brackets
- Input voltage: 230VAC
- Input frequency: 50Hz
- Compatible system voltage: 12V nominal
- Output voltage: Absorption 14.7V / Float 13.8V
- Max charge current: 20A
- No. charging stages: 3
- No. outputs: 1
- Min. battery voltage required to charge: 8V
- Recommend battery capacity: 150-300 Ah
- Battery compatibility: Lead/calcium, maintenance-free, sealed, deep-cycle, AGM, Gel
- Operating temperature range: 0ºC to 40ºC
- Mains connection: 1.5m cable fitted with a 3-Pin UK Plug
- Battery connection: 1.2m pre-wired with crocodile clips
- Weight: 1.45kg
- Overall dimensions: 112 (L) x 226 (W) x 52 (H) mm (excluding bracket or feet)
- Compliance: CE, RoHS, WEEE
Part Number: 0-647-20

Durite is a UK-based company that has built an impeccable reputation manufacturing and supplying high-quality parts to the automotive aftermarket for over 80 years.