Cable Connection Kit For USB Sockets and 12V Power Sockets

  (1 Review)
Price:  £3.99   (£3.33 Exc. VAT)

Product code:  P01963

Availability:  

  

In stock

This 'plug and play' pre-assembled cable connection kit comes with everything you need to wire in our USB sockets, 12V / 24V power sockets or voltmeters to your vehicle's electrical system.  Installation is quick and simple with no special tools required for perparing and crimping cables.

The kit consists of 2 x 1.5m lengths of 1.5mm² (21A) positive and negative cables sheathed in heat-resistant, protective PVC sleeving and a 20mm glass fuse holder fitted with a 10A replacable fuse.  Battery connections are 2 x 6mm dia. brass ring terminals and the socket connections are 2 x 6.3mm fully insulated push-on female blade terminals.

This kit is ideally suited for connecting to leisure batteries in campervans, motorhomes and boats or to the starter battery on motorbikes and scooters, but it would suit any application using a 12V or 24V DC system where a cable run of 1.5m is sufficient. 

Fuse can be replaced for one of a different blow rating to suit your application (please see Downloads / Links tab).  Do not exceed 10A.

 

  • Voltage rating: 12V DC & 24V DC
  • Fuse holder current rating: 10A max.
  • Cable spec: 1.5mm² / 16AWG (21A), UL rated, red/black pair
  • Cable length: 1.5m
  • Fuse type: 20mm glass (radio fuse)
  • Fitted fuse rating: 10A (do not exceed)
  • Fuse position: 200mm from battery (approx.)
  • Max. working temp: 105°C
  • Battery connection: 6mm dia. brass, non-insulated ring terminals
  • Load connection: Fully insulated 6.3mm push-on female blade terminals

Part Number:  JH-0000

Average Rating (1 Review):  
Write a Review and share your opinions!

Rating:  
Does the job.
Thursday, 23 January 2020  | 

Used in conjunction with a panel mount socket makes for an easy plug and play to my bike's battery. Terminations are good and cable long enough for a large bike. Fast delivery too.