Victron Energy Blue Smart IP65 Charger - 12V 7A (Bluetooth Built-In)

Description 

The 12V, 7A Blue Smart IP65 Charger is the new portable battery charger from Victron Energy featuring built-in Bluetooth. This charger range represents the latest in professional charging technology, utilising a seven-step charging algorithm to get the best out of your battery. ensuring better performance and longer life. Unlike other brands the Blue Smart chargers will attempt to recharge a deeply-discharged battery by force-feeding it with a low current. Normal charging will then be resumed as soon as there is sufficient voltage across the battery terminals.  Built-in Bluetooth allows you to monitor the status of your charger via any Android or Apple device or laptop and all settings of the charger can be configured with the VictronConnect app.

Includes crocodile clips and 8mm ring terminals for battery connection.

Recommended for batteries with a capacity in the range of 20 - 70Ah (classic cars, small leisure batteries)

Check if this charger is right for your application HERE

Features

• 7-stage smart charge algorithm
• Water, dust and chemical resistant
• Can recover fully discharged 'dead' batteries
• Automatic power supply function (can act as PSU)
• Severe cold performance, down to -30ºC
• Battery life-enhancing features
• Can be left connected & will not overcharge
• Low power mode for charging smaller batteries
• Storage mode for long-term connection
• Temperature compensated charging for lead-acid batteries
• Li-On battery mode
• Setup, configuration and monitoring by Bluetooth connection
• Charges all battery types (wet, Gel, AGM, calcium and Lithium-ion)
• Silent operation - no fan
• Short-circuit protection
• Over-temperature protection
• Reverse polarity protection
• 5 year manufacturer's warranty

Specification

• Recommended battery capacity: 20-70Ah
• Input voltage rating: 180 - 265V AC
• Output voltage: 13.2-14.4VDC depending on settings and charge stage
• Max. charge current: 7A
• Low current mode: 2A
• Standby power consumption: 0.5W
• 'No load' power consumption: 1mA (0.7Ah per month)
• Efficiency: 94%
• Temperature compensation: 16mV/ºC
• Operating temperature: -30ºC to +50ºC (full rated output up to +30ºC, then output reduces)
• Cooling method: Natural (no fan)
• Mains connection: 3-pin UK plug (BS 1363) on 1.5m cable
• Battery connection: Croc clips or ring terminals on 1.5m cables
• Ingress Protection rating: IP65 (splash and dust proof)

Downloads

• User manual
• Data sheet
• Victron Connect App download
• Victron Connect App Manual