Product code: P00162
4 way, quick release nylon connector block housings for use with non-insulated 6.3mm male and female blade terminals with locking tabs.
Terminals are not included so please purchase separately (see further information below). This is to allow you to select the correct terminals according to the cable size you wish to use. The 3 options are:
Note: Male blade terminals fit into the female connector housing and vice-versa.
Sold as a male/female pair.
The following terminals can be used with these connector housings:
Part Number: MCM4 + MCF4
Most multi connectors are designed for the thin wires found in modern cars, but I needed something to handle the fat wires found in classic cars without relays. These connectors have plenty of room for fat insulation and spade terminals to handle the high current. Pity they are not waterproof but I managed to squeeze a 6 way superseal rubber boot over each end. It's a bit fiddly buying the terminals separately, but it does give you the flexibility of choosing your own terminal size if you have different size wires in the same plug, as I did. All in, a nice bit of kit at low price.
I had a little project to obtain a live feed in my caravan whilst being towed to run a rear view camera. 12 Volt Planet gave wonderful advice and supplied everything to enable me to make my own T-piece 'loom' to insert between a live plug and socket to achieve this without making any changes to the original wiring. And everything necessary arrived the next morning. First class service. Would recommend to anyone. Thanks.
Need some hints, tips or guidance on 12V electrics? Visit our Knowledge Centre for a wealth of useful information
Watch our YouTube "how to" guides here
Free UK Delivery on Orders over £100Standard Delivery only £3.95*Exclusions Apply
We accept telephone ordersCall 01844 885100
We Ship Worldwide
© 2021 12 Volt Planet Ltd. All Rights Reserved. Company Reg no. 8239412
Home > Multi-Way Connectors > Multiple Connector Blocks