|Average Rating (44 Reviews): |
Friday, 30 July 2021 | Philip
This is just a stamp, you cannot crimp with this tool alone. It is almost useless in situe as it required a press in order to work.
Hi, We are sorry you felt this way. Whilst yes this stamps the terminal we have found this has created strong connections. Although it is easier with a press the tool can be used with just a hammer as has been done by many customers (see reviews below). If you contact our sales team we will be more than happy to discuss your concerns further if required.
Friday, 9 July 2021 | Paul
This is one of those tools that make the job a simple one accomplished in a minute or two and the result is spot on.
Simple but effective tool
Wednesday, 16 June 2021 | Graham
I purchased this tool after deciding I could not go the cost of fancy hexagonal crimper for the dozen or so lugs I wanted to crimp. As I could assemble pretty much all my cables in the workshop, this tool was ideal. I used both alternative methods of compressing the tool (bench vice and club hammer) to compare results and they both created excellent solid crimps. I preferred the vice method just because it was easier to keep the cable located in the lug during the set up. Used to crimp some 10mm2 and 16mm2 cable/lugs. Will easily do bigger but would not suggest smaller.
Tuesday, 11 May 2021 | James
I'm always sceptical of 'consumer quality' tools, but this crimper isn't one. It produces good strong crimps with ease. Well done 12V Planet for improving the battery connections on my boat
12V Planet were also helpful when I asked for advice on other products. Good service.
Tuesday, 4 May 2021 | James
Does the job by hard to use ‘in situ’ due to the need to hammer quite forcefully. If you’re just doing a few crimps and can take the wires out then no problem but if you can afford a handheld crimper then best go for that.
Wednesday, 25 November 2020 | Justin
brilliant tool which does exactly want you want.
Thursday, 24 September 2020 | L
Tried it on up to 16sqmm, works fine. Might struggle on really heavy stuff. Needs a decent anvil to stand on. Helpful to crimp twice over full length of terminal.
Thursday, 17 September 2020 | Colin
This really is simple but effective. It works exactly as expected and for low volume use will be just the ticket. Plenty cheaper than the handled options!
Monday, 7 September 2020 | Colin
A quality tool that works well
Wednesday, 15 July 2020 | Luke
Never used anything like this before but the video on 12v planet website was very helpful and it worked really great using a hammer. I would have preferred to use a vice but mine wasn't big enough to fit it in but the hammer worked fine. I did a pull test on the terminasl afterwards and they were crimped solid so all good.
Read all 44 customer reviews...