Product code: P01463Brand: LED Autolamps
18 in stock
Please note: We are unable to send the 770mm length version by airmail as it exceeds the max. length allowed.
These interior strip lamps with integrated touch-sensitive on/off switch are designed to blend into any motorhome, campervan, boat or commercial vehicle interior with their sleek, contemporary design. They are available in three different lengths and have the option to be wired directly so that the touch sensitive switch is bypassed (for remote switching). They are surface mounted and at only 11mm deep are low profile, making them a good choice in applications where head-room is limited. The low current draw also means they are excellent replacements for older-style incandescent lights, making your battery last longer.
The lamp body is electro-plated aluminium with a tough polycarbonate lens and ABS end caps. Two screw hole blanking caps on top of the light can be removed (by pushing them off from the rear of the light) to access the fixing holes and the cable entry is on the rear of the light, beneath the touch switch (see videos in Manuals & Guides section).
Includes fixing screws and available in 260, 410 & 770mm lengths. Graphite grey and Silver versions also available.
These lights come with a 3 year warranty.
PLEASE NOTE: The screw hole blanking caps must be pushed out from the rear of the light to access the screw holes. Removing the end caps of the light is unnecessary, and is highly likely to result in damage to the switch and will void the warranty.
Part Number: 40260
Highly delighted with the service from 12 Volt Planet and will shortly be ordering some more lights from them.Very pleased with the look of the light which looks very neat although, because of the weather in Scotland, I have been unable to get there and actually fit it.
I bought two of these for our Mazda Bongo: one to replace the standard rear cab fluorescent tube and one to fit below an overhead/top locker, above the sink and hob. I found them to be compact, slimline, very easy to install (clear instructions and the option to wire with separate switch or just to the built-in touch sensitive switch) and very bright (but not too bright). For Bongo owners: on its own, this light is too slim/small to cover all of the the hole left when rear cab fluorescent is removed, so you will need to fabricate a fitting plate (I made one from perspex sheet, covered in van carpet fabric). Very happy with this product.
Thank you for the feedback Anthony. Glad to hear that you are happy with them
Quick delivery. Easy to install. Very impressed with the amount of light. And very stylish
I have set it up as an emergency 'power cut' light attached to an old 12v car battery which is connected to a maintenance charger. Hallway position , and bright enough to illuminate the whole ground floor. Touch control makes it perfect for the job
another great product with great service
I bought this item to replace an old fluorescent light in my camper van that ran off my leisure battery.Fitting was simple and quick with an easy-to-follow video on the website.The light is much brighter than the original and draws next to nothing from the battery. Its low profile fits very well on my campervan van roof. Very happy with the light. Highly recommend,
I bought this as part of an upgrade to LEDs on my boat, and fitted it in the heads. There's only a small window there so it's quite dim without artificial light. This light (41 cm) fits well, is easy to wire up, and gives excellent light. Perhaps because of its shape, it doesn't seem to cast shadows, which is nice. It gets warm in use. I'm delighted with my purchase.
Very expensive strip lights, touch sensor has already failed on one. Had them less than a week.
Hi, These lights come with a 3 year please return any damage/faulty units back to us for replacement or refund - https://www.12voltplanet.co.uk/online-order-cancellation-form.html.
This light is great, its really thin and very bright for its size. Looks much nicer than the plastic style ones you often get in campervans! Only warning is that the wires stick directly out the back of the light (you cannot fold them flat to run flush with it under headlining or any thing) so be prepared to drill a hole to wire them into what ever surface you mount it on. The 2 tiny screws need to be taken off the ends to get to the fixing holes too, this took me a while to work out!
We're using one of these to light up a 20ft shipping container off a car battery. Straightforward to install, lightweight, and tons of light.
Read all 17 customer reviews...
LED Autolamps has grown rapidly to become the industry leader for European-certified vehicle LED lighting solutions. Putting its focus on quality, it designs and manufactures products that are built to last, with most lights having a minimum warranty of 3 years.
Need some hints, tips or guidance on 12V electrics? Visit our Knowledge Centre for a wealth of useful information
Watch our YouTube "How To" guides here
Free UK Delivery on Orders over £75 Standard Delivery only £4.95 *Exclusions Apply
We accept telephone orders Call 01844 885100
We Ship Worldwide
© 2024 12 Volt Planet Ltd. All Rights Reserved. Company Reg no. 8239412
Home > LED Lighting > LED Interior Strip Lights