This highly durable 150W black semi-flexible solar panel features high-efficiency monocrystalline cells and is reinforced with fibreglass plastic and a strong ETFE surface. This panel is perfect for permanent outdoor use in a variety of battery charging applications including campervans, motorhomes, caravans, narrowboats, yachts, solar lighting systems, off-grid, and back up solar power systems.
Multiple panels can be connected in parallel to increase the current, or in series to increase the voltage and allow 24V/36V/48V battery banks to be charged (depending on the solar controller used). The panel can also be used as a direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps) and for various grid-tie applications.
The junction box for this particular panel is mounted on the rear with 3m of 4mm² twin-core cable leading from it. This means that the junction box is completely hidden, requires no separate cable gland on the roof, and offers a low profile, professional finish after installation. Please note that a hole must be cut into the roof/surface to accept the junction box.
Features
- Robust construction - ETFE & fibreglass
- Rear mounted junction box
- Special textured surface improves performance
- High efficiency 9-busbar monocrystalline solar cells
- Discrete and aesthetically pleasing black backing
- Incredibly light, thin & flexible
- High resistance to salt water environments - perfect for marine applications
- Sealed waterproof design for use in all weather conditions
Strong ETFE coating
In addition to the fibreglass reinforcement, the surface of this 150W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared with standard semi-flexible solar panels. As a result, these particular panels are extremely hard-wearing and less prone to cracking, delamination, and corrosion. The panel construction is fully sealed and waterproof, providing a high resistance to saltwater and making it perfect for use in marine environments.
Anti-reflective textured surface
The lightly textured coating creates an anti-reflective surface that reduces the reflection of light whilst maximising the absorption of light from every possible angle, thereby increasing light collection and efficiency. This ensures high performance in low light or cloudy conditions, or when the light falls at an angle (in the morning, evening, or in winter).
High quality 9-busbar solar cells
This panel features new generation 9-busbar solar cells, which are more efficient than the 2, 3, 4 or 5 busbar solar cells used in most other solar panels as they are able to extract more power from the same surface area. This results in a smaller overall solar panel which is ideal for applications where space is limited.
All-black design
This solar panel has a black backing, making it ideal for discreet and aesthetically pleasing installations on dark coloured roofs, vehicles or mounting surfaces. Please note that this solar panel is not 'ultra jet-black' - the exact hue may vary marginally from panel to panel, depending on the batch of solar cells.
Light, thin and flexible
At only 2.68kg and 2mm thick, this panel is incredibly light and thin. This thin profile allows a very high degree of flexibility, enabling fitment in a wide variety of applications where conformance to the curvature of a building, vehicle roof or boat deck is required. Bonding with a suitable adhesive/sealant is preferable, although the panel can also be fixed by bolts or screws if the holes are suitably sealed.
Ease of installation
The panel is fitted with a round, rear-mounted junction box and 3m of UV-resistant twin-core solar cable (4mm² cross section) with un-terminated ends for easy installation and a highly professional finish.
Note: This panel must be used with a suitable solar charge controller and not connected directly to a battery.
Click here for an installation kit for this panel
