Victron Phoenix Smart IP43 Charger 12V 50A (1+1 Outputs)

Price:  £455.66   (£379.72 Exc. VAT)

Product code:  P02202

Availability:  

  

In stock

The Phoenix Smart IP43 Charger range has all of the technology you have come to expect from Victron, with built-in Bluetooth, 5-stage adaptive charge algorithm and a host of other features. This 12V high output version has twin charging outputs; one capable of delivering a full 50A to a leisure or house battery (or bank of batteries) and the other providing up to 3A of trickle charge to maintain an engine start battery.  Victron's adaptive, intelligent charge algorithm automatically optimises the charging stages in relation to the way in which the battery is being used. So, for shallow discharges, the absorption time is kept short to avoid over-charging and for deep discharges, the absorption time in increased to ensure a full charge.

There is automatic voltage compensation to account for voltage drop over the DC cabling, a fully programmable charge algorithm with presets to suit all battery types (inc. LiFePO4), remote on/off connections and a programmable relay that can be used to activate on an alarm condition (low/high voltage, high temp etc.) or other events.

The charger is silent in operation, relying on natural convection cooling rather than a fan, and the output can be limited to 25A or 12.5A , meaning it can be used with smaller battery banks if required. It is also fully configurable using the built in Bluetooth connectivity with a huge number of options available through the VictronConnect app. The VE.Direct port allows it to be connected to a network of other Victron devices and be centrally monitored, controlled and configured by GX devices such as the Cerbo GX.

We recommend this charger for use with lead-acid batteries (or banks of batteries) with capacities of around 250 - 500Ah.  It can be used with smaller capacity lithium batteries depending on their charge acceptance rate . In all cases, refer to the manufacturer's guidance for maximum charge acceptance rates.

Please note:  This charger does not come supplied with an AC mains power cable; it must be purchased separately (click here).

Features

  • Bluetooth enabled
  • 1+1 outputs (50A + 3A trickle charge)
  • Automatic voltage compensation
  • Adaptive 5-stage charge algorithm
  • BatterySafe mode to prevent damage to to excessive gassing
  • Storage mode to extend battery life
  • Compatible with all lead-acid batteries & lithium
  • Fully programmable charging algorithm
  • Remote on/off control
  • VE.Direct interface
  • Programmable relay
  • Built-in protection against short circuit, reverse polarity and over-temperature
  • Fanless
  • Current limiting options

 

  • Battery system voltage: 12V nominal
  • Input voltage: 210-250 VAC
  • DC input voltage range: 290-355 VDC
  • Frequency: 45-65 Hz
  • Output voltage: 13.2 - 14.7V depending on charge stage and settings
  • Power Factor: 0.7
  • No load power consumption: 1W
  • Efficiency: 92%
  • Fully programmable: Yes (via Bluetooth and/or VE.Direct)
  • Max. charge current (main output): 50A (25A in low current mode)
  • Charge current (secondary output): 3A
  • Charge algorithm: 5 stage adaptive
  • Battery reverse polarity protection: Yes (fuse not user replaceable)
  • Output short circuit protection: Yes
  • Over temperature protection: Yes
  • Can be used as a power supply: Yes - output voltage configurable
  • Operating temp. range: -20 to +60°C (output derates linearly above 40°C to 20% @ 60°C)
  • Programmable relay rating: 5A, 28VDC max.
  • Max. cable size for battery connection: 16mm²
  • AC connection: IEC 320 C14 inlet with retainer clip
  • Protection rating: IP43 (electronic components), IP22 (connections)
  • Weight: 3.5kg
  • Overall dims: 180 (H) x 249 (W) x 100 (D) mm
  • Warranty: 5 years

Part Number:  PSC125051085

Bar Code:  8719076041627

Be the first to Write a Review for this item!

Related Products
Extra Flexible PVC Battery Cable - 16mm˛ 110A
From:  £4.46
Victron Cerbo GX
£281.83