Victron 50W Polycrystalline Solar Panel Kit - 10A MPPT Smart Solar Charge Controller

Price:  £242.15   (£201.79 Exc. VAT)

Product code:  P01210

Delivery:  Surcharge of £12.00



Special order item. Normally ships within 1-3 working days.

Please note:

  • This kit is made-to-order and once ordered cannot be cancelled.
  • Due to its size this item is subject to a shipping surcharge of £12.00 and is only available to Mainland UK addresses (please allow up to 5 working days for delivery).


This solar panel kit contains everything you need to install solar power to your caravan, campervan, motorhome or boat to charge a 12V leisure battery.  Victron are renowned for their high quality power management products and this kit utilises a Blue Solar rigid 50W polycrystalline panel with enhanced high temperature operation, exceptional low-light performance and high sensitivity to light across the entire solar spectrum. This is coupled with a 10A MPPT solar charge controller featuring ultra fast Maximum Power Point Tracking, intelligent battery management and built-in Bluetooth connectivity.

Recommended for: low power consumption applications where the vehicle is to be used mainly during the Summer months or where the solar panel is intended primarily to maintain the battery, for example during periods of storage when it is un-used.

Kit contents

  • Rigid glass 50W polycrystalline panel in a sturdy anodised aluminium frame (540 x 670 x 25 mm)
  • 12/24V 10A MPPT BlueSolar Charge Controller
  • Tough ABS mounting brackets and fixings for panel
  • Twin cable gland for waterproof routing through roof
  • 5m of 4mm dedicated solar cable
  • Sikaflex 291 bonding adhesive to secure brackets and cable gland to roof
  • Installation instructions and controller manual can be downloaded from the links below

Note: The panel must be installed lengthways to the direction of vehicle travel (i.e. brackets at front and back).

Solar panel features & specs

  • Polycrystalline panel with high transmission, tempered glass for stiffness and impact resistance
  • Sealed, waterproof junction box with pre-wired quick connectors
  • High performance bypass diodes to to minimise power drop due to partial shading
  • Advanced EVA encapsulation system
  • 25 year limited manufacturer's warranty on power output & performance
  • 2 year limited manufacturer's warranty on materials and workmanship
  • Panel size: 540 (L) x 670 (W) x 25 (D) mm
  • Manufacturer's part no: SPP030501200
  • Nominal power: 50W
  • Max-power voltage: 18V
  • Max-power current: 2.78A
  • No. cells in series: 36
  • Panel weight: 4.3kg
  • Overall dimensions with panel mounted in brackets: 680 (L) x 720 (W) x 50 (H) mm
  • Distance from roof to underside of panel: 15mm

Solar charge controller features & specs

  • 3-stage battery charging (Bulk / Absorption / Float)
  • Single output (charges 1 battery or 1 bank of batteries)
  • Over-current protection
  • Short circuit protection
  • Reverse polarity protection (solar panel or battery)
  • Low voltage load disconnect output
  • Built-in Bluetooth connectivity
  • Battery voltage: 12V/24V auto select
  • Output voltage: (Absorption 14.4V / Float 13.8V)
  • Max. charge current: 10A
  • Power consumption: 20mA
  • Low voltage load disconnect: 11.1V
  • Low voltage load reconnect: 13.1V
  • Cooling: Natural convection
  • Ingress Protection rating: IP22
  • Weight: 0.5kg
  • Overall dims: 100 (W) x 113 (H) x 40 (D) mm


Part Number:  CBS50P/MPPT

Be the first to Write a Review for this item!