Victron 140W Polycrystalline Solar Panel Kit - 20A Charge Controller (2 Output)

Price: £384.67(£320.56 Exc. VAT)

Product code: P01219

Delivery: Surcharge of £12.00

Availability:

Special order item. Normally ships within 1-3 working days.

Please note:

This kit is made-to-order and once ordered cannot be cancelled.
Due to its size this item is subject to a shipping surcharge of £12.00 and is only available to Mainland UK addresses (please allow up to 5 working days for delivery).

Victron 140W Polycrystalline Solar Panel Kit - 20A Charge Controller (2 Output)

View large image

Description

This solar panel kit contains everything you need to install solar power to your caravan, campervan, motorhome or boat to charge two 12V batteries (e.g. two leisure batteries or a starter + a leisure battery). Victron are well respected for their high quality power management products and this kit utilises a Blue Solar rigid 140W polycrystalline panel with enhanced high temperature operation, exceptional low-light performance and high sensitivity to light across the entire solar spectrum This is coupled with a 20A twin output PWM (Pulse Width Modulation) solar charge controller featuring temperature sensing, 3-stage charge control and protection against over-current, short-circuit and reverse polarity.

Recommended for: moderate-high power consumption applications, such as halogen lighting + water pump + coolbox/fridge + 12V sockets + TV + sound system.

Kit contents

Rigid glass 140W polycrystalline panel in a sturdy anodised aluminium frame (1480 x 670 x 35 mm)
12/24V 20A twin output PWM solar charge controller
Tough ABS mounting brackets and fixings for panel
Twin cable gland for waterproof routing through roof
5m of 4mm dedicated solar cable
Sikaflex 291 bonding adhesive to secure brackets and cable gland to roof
Installation instructions and controller manual can be downloaded from the links below

Note: The panel must be installed lengthways to the direction of vehicle travel (i.e. brackets at front and back).

Solar panel features & specs

Polycrystalline panel with high transmission, tempered glass for stiffness and impact resistance
Sealed, waterproof junction box with pre-wired quick connectors
High performance bypass diodes to to minimise power drop due to partial shading
Advanced EVA encapsulation system
25 year limited manufacturer's warranty on power output & performance
2 year limited manufacturer's warranty on materials and workmanship
Panel size: 1480 (L) x 670 (W) x 35 (D) mm
Manufacturer's part no: SPP141-12
Nominal power: 140W
Max-power voltage: 18V
Max-power current: 8.05A
No. cells in series: 36
Panel weight: 12.5kg
Overall dimensions with panel mounted in brackets: 1620 (L) x 720 (W) x 50 (H) mm
Distance from roof to underside of panel: 15mm

Solar charge controller features & specs

3-stage battery charging (Bulk / Absorption / Float)
Twin outputs (charges 2 separate batteries)
Programmable charge current ratio (default setting: equal charge to each battery)
Charge voltage settings for Flooded, AGM or Gel
Internal temperature sensor
Over-current protection
Short circuit protection
Reverse polarity protection (solar panel or battery)
Low voltage load disconnect output
Battery voltage: 12V/24V auto select
Output voltage: (Absorption 14.4V / Float 13.7V)
Max. charge current: 20A
Power consumption: 4mA
Cooling: Natural convection
Ingress Protection rating: IP20
Weight: 0.18kg
Overall dims: 153 (W) x 76 (H) x 37 (D) mm