This high-quality switch panel from marine equipment specialists, Vetus, has 6 separate circuits, each provided with a 10A, 20mm glass fuse, rocker switch and circuit 'ON' indicator LED. It is suitable for use with 12V systems only.
If an overload situation occurs, the related fuse will blow and the corresponding LED will go out to indicate the fault. The fuse holders unscrew to enable replacement (once the reason for the overload has been resolved) and it is important to note that fuses with ratings lower than 10A can be used, if required, but fuses greater than 10A should never be used. The panel has spaces next to each switch onto which circuit identification legends can be fitted, and a 60 piece self-adhesive legend set is supplied with the panel.
The panel is pre-wired and provided with an 8-way, on-board terminal block for connection of the main positive feed, negative feed for the LEDs and connections for each of the 6 circuits. It is designed to be panel mounted and a fixing template is provided showing the panel cut-out size and fixing hole positions. The panel is made of synthetic and non-corrosive materials and comes supplied with full installation instructions, fixings and legend set for a straightforward, hassle-free installation.
Spare fuses are available here.