Product code: P00835
4-way standard blade fuse box with individual LEDs that light to indicate when a fuse has blown. Power input is via a common stud feeding each of the 4 circuits and the output connections are 6.3mm blade terminals on the sides of the unit. Supplied with a clear protective cover that latches into place and the base has 2 fixing holes for surface mounting.
Sold individually (fuses not included).
The nut on the stud is an imperial size (3/8" AF) and the stud accepts a 5.3mm dia ring terminal.
Please note that in order for the red LED to light, a very small, limited current passes through the circuit so you may still register continuity across the fusebox terminals when a fuse is blown or no fuse is in place. This limited current is completely safe but may cause connected LED lights to glow faintly (since they require such low current to operate).
Part Number: FBB4L
Does what it says, good quality
Great little fuse box with a common connector. Nice tight fit terminals for a good contact and trouble free operation.
I recently used two of these fuse boxes on my boat as part of a rewiring project, and they are a great way to replace inline fuse holders which tend to become unreliable and are not very user friendly in the marine environment.These boxes are small, easy to install and very user friendly, as LEDs show when a fuse is blown and the fuses are very easy to replace.
Need some hints, tips or guidance on 12V electrics? Visit our Knowledge Centre for a wealth of useful information
Watch our YouTube "how to" guides here
Free UK Delivery on Orders over £100Standard Delivery only £3.95*Exclusions Apply
We accept telephone ordersCall 01844 885100
We Ship Worldwide
© 2021 12 Volt Planet Ltd. All Rights Reserved. Company Reg no. 8239412
Home > Fusing & Circuit Protection > Fuse Boxes > Standard Blade Fuse Boxes With Busbars