Panel Mount Miniature Battery Isolation Switch With Removable Actuator - 100A

  (4 Reviews)
Price:  £12.99   (£10.83 Exc. VAT)

Product code:  P02048
Current Rating  100A
Number of positions  2

Availability  

  

13 in stock

Miniature battery isolation / master switch designed for panel mounting in a standard 29mm dia. accessory hole. This switch is the perfect solution for isolating domestic circuits from the leisure battery in a campervan, caravan or motorhome where a toggle/rocker switch is not sufficient but a full size isolation switch is too bulky.

As a security measure, the actuator on this switch can be removed at the OUT position.

Useful for preventing battery drain if left for long periods or for isolating the power source in an emergency.

High quality switch manufactured by SCI of Taiwan.

  • Voltage rating: 32 VDC max.
  • Max. continuous operating current: 100A (150A intermittent)
  • Body material: PBT
  • Terminal stud size: M6
  • Panel hole size for barrel clearance: 29mm
  • Overall dims: 56 (L) x 45 (Dia) mm
  • Max panel thickness: 10mm
  • Protrusion from front of panel: 20mm (approx.)

Part Number:  A23-7B

Average Rating (4 Reviews):  
Write a Review and share your opinions!

Rating:  
Bad design
08 April 2024  | 

Bought this in 2021 and finally come round to fit it and it had high resistance 120M ohm in both on and off positions and doesn't work as it should, waste of money


Rating:  
No CE mark
27 June 2022  | 

This switch failed almost immediately at 13.4V 50A. It got very hot and then went open circuit (at least no fire from the resulting temperature).
No CE mark and hence probably illegal in the UK.


Response:

Hi. Thanks for your review and I'm very sorry to hear of your experience with this switch. These are manufactured by a very well-established, reputable Taiwanese firm (SCI) and we have sold many hundreds of these over several years. We're not sure what caused the issue you experienced, but if you'd like to get in touch we'd be more than happy to provide you with a free-of-charge replacement.

Please note that CE marking is not required for all products; only those product categories that are subject to specific directives that provide for the CE marking. This switch is designed to carry less than 75V DC and so does not fall under the 'Low voltage electrical equipment' definition that would require a CE mark, but we are confident that it would have undergone all mandatory safety testing during the design stage and is safe to use.

Best regards
Paul Ballard


Rating:  
good
19 June 2022  | 

Perfect small switch for my van electrics panel.. I needed more than one isolator, and as such these miniatures work perfectly and are not too big, but still obvious. they are good quality compared to others on the market..


Rating:  
100A ISOLATION SWITCH
16 December 2020  | 

very small switch .i wonder if it can handle 100 amp?

Related Products
Single Core Thin Wall Cable - 10.0mm˛ 70A
From:  £3.56
Business Hours: Mon - Fri | 9am - 5pm
CALL Sales & Support: 01844 885100
Email: sales@12voltplanet.co.uk
12 Volt Planet

12 Volt Planet

Auto & Marine Electrical Components