Product code: P01821
A pair of solar-specific, UV-resistant cables with a 4mm² conductor cross-section. Supplied as 2 x 5m lengths with one end of each cable terminated with an MC4 connector (male and female) and the other end left un-terminated.
Ideally suited to connecting between a solar panel, equiped with MC4 connectors, and a solar charge controller.
As a guide, 4mm² cable is recommended for panels of 150W or more having a panel-to-controller cable length of 5m or more. If less than this, use 2.5mm² cable.
Note: Never connect or disconnect MC4 connectors whilst they are under electrical load as this can cause arcing which can damage the contacts.
Part Number: 5QM40 (X0006Q6ITN)
Be the first to Write a Review for this item!
Need some hints, tips or guidance on 12V electrics? Visit our Knowledge Centre for a wealth of useful information
Watch our YouTube "how to" guides here
Free UK Delivery on Orders over £100Standard Delivery only £3.95*Exclusions Apply
We accept telephone ordersCall 01844 885100
We Ship Worldwide
© 2021 12 Volt Planet Ltd. All Rights Reserved. Company Reg no. 8239412
Home > Solar Power > Solar Cable & Connectors