A pair of solar-specific, UV-resistant cables with a 2.5mm² conductor cross-section. Supplied as 2 x 5m lengths with one end of each cable terminated with a solar connector (male and female) and the other end left un-terminated. The solar connectors are MC4-compatible.

Ideally suited to connecting between a solar panel, equipped with MC4-type connectors, and a solar charge controller.

As a guide, 2.5mm² cable is recommended for panels of 150W or less having a panel-to-controller cable length of 5m or less. If greater than this, use 4mm² cable.

Note: Never connect or disconnect solar connectors whilst they are under electrical load as this can cause arcing which can damage the contacts.