Product code: P00164
8 way, quick release nylon connector block housings for use with non-insulated 6.3mm male and female blade terminals with locking tabs.
Terminals are not included so please purchase separately (see further information below). This is to allow you to select the correct terminals according to the cable size you wish to use. The 3 options are:
Note: Male blade terminals fit into the female connector housing and vice-versa.
Sold as a male/female pair.
The following terminals can be used with these connector housings:
Part Number: MCM8 + MCF8
As at least one other has said, these don't really work if you want a connection which you can disconnect again after you've first made it. Possibly the main fault lies with the matching spade connectors - they're simply much too tight. If you try to pull these connectors apart after first mating them, the spade connectors won't separate and the male spade pulls right through the plastic outer.
Hi, We are very sorry to hear you were disappointed by this product. Please contact our sales team who will endeavour to help.
Good solid connector, however having connected very difficult to seperate. Assembled and tested in workshop prior to install. Pulled 3 male insets half out of housing. Checked crimping, but was fine as was insertion. Assume female connectors just too tight.
Does what it should
Good product, and easy to crimp terminals. Will be using your company for future orders.
Need some hints, tips or guidance on 12V electrics? Visit our Knowledge Centre for a wealth of useful information
Watch our YouTube "how to" guides here
Free UK Delivery on Orders over £100Standard Delivery only £3.95*Exclusions Apply
We accept telephone ordersCall 01844 885100
We Ship Worldwide
© 2021 12 Volt Planet Ltd. All Rights Reserved. Company Reg no. 8239412
Home > Multi-Way Connectors > Multiple Connector Blocks