Fresh water, electronic tank probe for use with the CBE PC200, 210 & 380 control panels. Available in various lengths to suit your tank depth.
Note: these are not intended to extend to the bottom of the tank so the metal probes will actually be shorter than the tank depth options shown above.
The 3-pin connector block connects to a matching socket on the wiring harness provided with the PC200, 210 & 380 control panel kit.
Supplied with gasket and mounting nut for fitting to a 60mm diameter hole in your water tank.
Note: These probes cannot be cut down to length.
Not suitable for use with CBE PC100 or 110 control panels.
- Tank cut-out required: 60mm dia. hole
- Connector: 3-pin multiplug to connect to kit wiring harness
Part Number: 512018
Average Rating (1 Review): | |
15 August 2023 | Charles
Very good service and the product was just what I wanted
Response:
Thank you for the great feedback Charles
CBE is the market leader in Europe for electric and electronic equipment used in the caravan, campervan and motorhome sectors. Based in Italy and founded in 1976, it designs and manufactures complete systems for the leisure market and its stylish products can be found fitted as OEM equipment on many new vehicle conversions.