This London cold water tap from Comet is a well-proven design with a high quality chrome-plated construction that will give many years of reliable service. Its folding spout makes it perfectly suited for use with campervan & motorhome sink and sink/hob combinations that have folding glass lids.
The tap body uses a ceramic cartridge for zero maintenance with fine control of water flow, and the built-in microswitch can be used to activate a submersible or in-line water pump from a 12V DC supply. The tap can also be used with in-line pumps that are operated via a pressure switch, and the microswitch should be left disconnected in this case.
This tap fits tap holes of 21-27mm (approx.) but can also be used in 33mm diameter tap holes using an optional Adaptor Flange (note that nut supplied with this tap is too small to be used in 39mm tap holes). The cold water connection has a hosetail for fitting to 10mm ID flexible hose.
Features
- Cold water only
- Folding spout, ideal for sinks with folding glass lids
- Built-in microswitch
- High quality construction
- Ceramic cartridge
- Fine regulation of water flow
- Fits 10mm flexible hose
- 1.5 bar (22 psi) max. pressure
- Fits larger tap holes using optional adaptor flange
Further information
Adaptor flange for use with 33mm tap holes can be found here.
A hot/cold mixer version of this tap without microswitch can be found here
Pumps for use with this tap can be found here
Flexible PVC hose for use with this tap can be found here.
Microswitch wiring instructions: Connect one wire to your +12V fused battery supply and the other wire to the +12V connection of your water pump. It doesn't matter which way round the wires are connected.