COVID-19:  We are open for business as normal. For information on how COVID-19 is impacting our services, please click here

Battery Terminal Clamp For Cube Fuses

  (11 Reviews)
Price:  £11.54   (£9.62 Exc. VAT)

Product code:  P01243



In stock

Battery Terminal (Cube) FusesBattery Terminal (Cube) Fuses

Special terminal clamp for use with ceramic cube fuses that fits to the positive battery post. This fusing arrangement totally eliminates any unprotected section of cable coming from the battery, giving you maximum protection for your circuits.

The fuse fits over the stud on the clamp and the cable is then fitted using a ring or copper tube terminal with a hole dia of 10mm. The plastic isolating washer is fitted next with the smaller diameter first (this fits inside the 10mm hole in the ring terminal and prevents it touching the stud). Finally the nyloc nut is fitted on top of the isolating washer and tightened.

Important: The isolating washer must be fitted in the correct orientation or there is a risk that the ring terminal and stud could come into contact, by-passing the fuse and rendering it redundant. To ensure isolation, this clamp will only accept a single terminal, so if you need to take off more power feeds we recommend connecting a busbar, power post or power jointing box to the main cable.

Sold individually.

Fits SAE tapered lead positive battery posts

  • Material: Tin-plated brass
  • Minimum hole size for ring terminal: 10mm
  • Overall dims: 66.5 (L) x 29.7 (W) x 20.0 (H) mm

Part Number:  B28712K

Left hand and right hand entry battery terminal covers are available for this product

Average Rating (11 Reviews):  
Write a Review and share your opinions!

Works with modification
Wednesday, 8 April 2020  | 

I'm in the US, so I'm not sure if the cube fuses are different over here. What I found was the center hole fit the (US) cube fuse but the tabs were way too narrow. I ground off the tabs and everything worked fine. I noticed someone else stated the same issue so perhaps it's not just me.

Regardless, once the fuse was on everything worked fantastic. I gave it 4 just because it had to be modified, but I'd certainly recommend the product to someone.

Battery Terminal Clamp
Tuesday, 3 March 2020  | 

In general OK, but the recess for the cubed fuse was not wide enough, I had to file it a bit.
But I would buy it again, becaus of the nice configuration cable/pole.

Fused battery terminal
Thursday, 7 June 2018  | 

Does what it says

smart construction
Monday, 5 February 2018  | 

smart construction, seems to be good quality

Battery clamp
Tuesday, 7 November 2017  | 

Very compact. A much tidier solution than the maxi fuses with their fuse holder

Great for low clearance
Tuesday, 10 October 2017  | 

Other lugs with cube fuses are too tall for my battery location. This one is low profile and allows the cable to be rotated at any angle

Great product!
Tuesday, 27 December 2016  | 

Easy to install and a great design. Eliminates a bulky maxi-fuse and holder.

Friday, 16 December 2016  | 

Very nice quality and compact.

Safety for leisure batteries
Saturday, 15 October 2016  | 

Along with the fuses, great protection for cabling

Tuesday, 22 March 2016  | 

Great product and ideal as the last line for protecting against fire in the event of a short circuit.

Read all 11 customer reviews...

Related Products
Battery Terminal (Cube) Fuses
Copper Tube Terminals - 35mm▓áCable
From:  £1.03