Terminals to fit Anderson SB50 double pole and PP75 Powerpole connector housings
Please select the terminal to match your cable size from the drop-down list (two terminals per housing required for SB50, one terminal required per housing for PP75)
Terminal crimping - Terminals should be crimped to the cable conductor using a suitable tool (we recommend P01069). Alternatively the terminals can be soldered to the conductor.
Terminal insertion - Insert the terminal into the connector housing so that the step at the end of the terminal slides along the surface of the sprung metal tab within the housing. Continue pushing the terminal into the housing until a sharp click is heard, which indicates that the tab has latched into place behind the step and the terminal is locked in place.
Terminal removal - Press the sprung metal tab in the housing fully flat using a suitable tool (so that it clears the step on the terminal body) and withdraw the terminal.
- Material: Copper with Silver/Tin plating
Part Number: TC-060-S
|Average Rating (7 Reviews): |Easy to use with solder joint
Wednesday, 23 September 2020 | Geoff
Assembled these with 16mm2 cable by soldering as no crimping tool large enough. Needed to be a little careful with the insulation but with shrink wrap sleeving there was exposed wire showing
Wednesday, 2 September 2020 | John
Good quality connector pins was going to solder but opted for crimp . Brill
Monday, 24 August 2020 | Cliff
These were ideal - easy to solder and fit
Thursday, 14 May 2020 | Ant
easy to crimp up and fit to the block
make sure that you are getting the correct size to fit your cable
Monday, 2 December 2019 | Young
Arrived quickly and were just the job.Good quality items.Very pleased.
Terminals for Anderson sb50
Tuesday, 18 June 2019 | Alvin
Always a good idea to have a few spares available for this quality connector.
Anderson Powerpole Connectors
Tuesday, 23 October 2018 | Derek
These supplied replacements for another unsuitable cable size were exactly right for the 16mm squared cable being used. This and the interchangeability of the system worked perfectly for our application.
Anderson Power Products (APP) is an international market leader in high power interconnect solutions, producing reliable, rugged products that are used across the globe. Established in 1877, it has a wealth of experience and has become the 'go to' brand for battery connect/disconnect products in the leisure, industrial, telecoms and off-grid sectors.