Home > Power Connectors > Anderson SB Connectors
Product code: P01369
Spare/replacement terminal to fit Anderson SB350 Double Pole connector housings for cable size 50mm2.
Terminal crimping - Terminals should be crimped to the cable conductor using a suitable tool (we recommend P01069). Alternatively the terminals can be soldered to the conductor.
Terminal insertion - Insert the terminal into the connector housing so that the step at the end of the terminal slides along the surface of the sprung metal tab within the housing. Continue pushing the terminal into the housing until a sharp click is heard, which indicates that the tab has latched into place behind the step and the terminal is locked in place.
Terminal removal - Press the sprung metal tab in the housing fully flat using a suitable tool (so that it clears the step on the terminal body) and withdraw the terminal.
Butane Gas Micro Torch£39.47
Flux Cored Solder (60:40 / Tin:Lead) - 18SWG, 0.5Kg£26.07 (1)
Heavy Duty Sprung Loaded Terminal Crimping Tool£22.81 (11)
Be the first to Write a Review for this item!
Enter your e-mail to hear about new products and receive exclusive discounts.